PQube Power Quality/Energy Monitor
  • Easily reduce service costs for sensitive equipment
  • Detects and records sags/dips, swells, frequency variations, and more
  • All recordings in open files, on digital camera SD memory card
  • No software required: files are GIF pictures and CSV spreadsheet files
  • True RMS, 256 samples per cycle, 100V – 690V nominal, 50/60 Hz
  • Optional plug-in current / energy monitoring
  • Optional plug-in Ethernet e-mail
  • Part Number PQube-01-0000
PS-1 Power Supply Module
  • Your PQube has screw terminals for powering from 24VAC or 24-48VDC.
    Need to power your PQube from 100~240V, 50/60 Hz? Choose this module.
  • Plugs directly into the side of your PQube.
  • TUV, CE, RoHS markings
  • Part Number PS1-100~240-00
ETH1 Ethernet Module
  • Automatic e-mails whenever a disturbance occurs, complete with event
    summary information, GIF graph pictures, and Excel® compatible CSV attachments.
  • Update firmware, PQube setup via e-mail. Read meters, too!
  • Supports SNTP (Simple Network Time Protocol) for synchronizing your PQubes
    to UTC time standard - better than ±2 second absolute accuracy.
  • (Requires a standard e-mail account on any e-mail server.)
  • Part Number ETH1-10T-00
CT4 Current Sensing Module
  • Plug-in module has integrated CTs. Just pass wires through openings.
  • Four channels of current monitoring
  • Accuracy: ±0.1% rdg ±0.1% FS
  • Maximum conductor diameter - 0.34in (8.6mm)
  • Adds current waveforms to PQ events
  • Enables power consumption monitoring - kW
  • Part Number CT4-20A-00 ( 0 - 20 Amps nominal)
  • Part Number CT4-100A-00 ( 0 - 100 Amps nominal)
XCT4 Current Transformer Interface Module
  • Connects directly to current transformer secondary wires.
  • Four channels of current monitoring
  • External CT input ratio range: 1:1 to 1000:1
  • Accuracy: ±0.1% rdg ±0.1% FS (plus uncertainty of external CTs)
  • Adds current waveforms to PQ events
  • Enables power consumption monitoring - kW
  • Part Number XCT4-1A-00 for CTs with 1Amp secondary
  • Part Number XCT4-5A-00 for CTs with 5Amp secondary
  • Part Number XCT4-0.333V/1V/5V/10V-00 with voltage outputs
 Split Core Current Sensors
  • For use with XCT4-0.333V-00 Current Transformer Interface Module
  • Easily snap around existing electrical wiring
  • Output 0.333V at rated current
  • Frequency range: 50Hz to 400Hz
  • Accuracy ± 1% (10% to 130% of rated current)
  • Crest Factor (peak measurement) 3.5 times nominal CT rating.
  • Phase angle <2 degrees measured (50% rated current)
  • Leads: 8ft (2.4m), 22 AWG twisted pair, Black (Positive(+)) and White (Negative(-))
  • UL recognized
TH1 Temperature-Humidity Probe
  • Monitors ambient temperature and humidity
  • Every PQube accepts two electrically-isolated probes.
    Use one for local temperature and humidity, and put the
    other on a standard 2.5mm stereo extension cable for monitoring remote conditions.
  • Temperature accuracy: typical: ±0.5°C.
  • Max: ±2°C (-20°C - +80°C)
  • Humidity accuracy: typical: ±4.5%RH (20-80%RH),
  • Max: ±7.5% (0-100%RH)
  • Scan interval: 2 seconds
  • Part Number TH1-80C-00

 

Please contact us for a detailed quotation and information on other PQube accessories.

 

 

©Copyright 2009 PQ Logic Corporation. All rights reserved.